
Add to Cart
FL-30 100L Fluid Bed Granulating Processor For Pharmaceutical Industry
Through powder granulation, fluidity is improved and dust flying is reduced.
Improve its solubility through powder granulation.
Mixing, granulating and drying can complete granulation in one machine.
Set pressure relief holes, once an explosion occurs, equipment personnel will not be injured.
Granulation in the refrigeration industry: tablet granules, granular granules, capsule granules. Granulation in the food industry: cocoa, coffee, milk powder, granular juice, condiments, etc.
Granulation in other industries:pesticides, feed, fertilizers, pigments, dye chemicals, etc. Drying of powdery or granular wet materials.
Coating: granule, pill protective layer, color preparation, film, enteric coating, etc.
The material powder particles are in an annular fluidized state in the raw material container (fluidized bed). After being preheated and mixed by the heated air after purification, the binder solution is sprayed into atomization, so that several particles are gathered into agglomerates containing the binder.
Due to the continuous drying of the material by the hot air, the water in the agglomerates evaporates. The binder solidifies, and this process is repeated continuously to form ideal and uniform microporous spherical particles.
FL-30 Fluid Bed Granulator Features
1. Control system is PLC & Touch screen type, operation is convenient and stable. There is strict interlock function, so there will be no incorrect operation. There are temperature and pressure measure and display devices, inlet air temperature is controlled by PID control technology.
2. Application range is wide, it can dry different materials, and it can ensure the definite fluidized height so that the load of bag dust collector is reduced. The bag dust collector can remove dust continuously when the granulator dryer is working. We can set dust remove time and interval time, so the dust removing efficiency and fluidized efficiency is good. The bag is static-free type, the static electricity appears during the granulating and drying process can be eliminated, so the material is not to stick on the bag. There is differential pressure display device for the bag, so we can clean or replace the bag in time.
3. Air volume of the drying system is controlled by exhaust fan, and the exhaust fan is controlled by inverter. So it is convenient to adjust the air volume for different materials.
4. The equipment is round sealed structure, there is no dead angle. So it is convenient to clean the machine and there is no cross contamination. It meets the requirements of GMP.
5. The air distributing plate is special designed, air is well-distributed, material fluidized efficiency is good. Mesh plate is quick-install type, it is convenient to clean and maintain.
6. Adopts air cylinder type sealing and air bag sealing structure, seal is stable and operation is easy.
7. Heating source is electricity or steam, material of heater is stainless steel & aluminium fins, temperature differential is ±3℃..
8. Mixing, granulating and drying can be finished in one step.
9. If there is organic solvent used in the granulating or drying process, explosion-proof system will be designed for the machine.
Technical Parameters
Item | Unit | FL-30 | |
Container | Volume | L | 100 |
Diameter | mm | 700 | |
Capacity | Min | kg | 15 |
Max | kg | 45 | |
Fan | Capacity | m3/h | 1800 |
Pressure | mmH2O | 480 | |
Power | kw | 7.5 | |
Steam expenditure | kg/h | 70 | |
Compressed air expenditure | m3/min | 0.9 | |
Main body weight | kg | 1000 | |
Steam pressure | Mpa | 0.3-0.6 | |
Temperature | oC | adjustable at the range from room temperature to 120oC | |
Working time | min | decided in accordance with the proplerties of raw materials | |
Field | % | >99 | |
Noise | dB(A) | <75dB(A) (when installation, main machine is separated from fan) | |
Size | m | 1.6x1.1x2.5 |
Product Show
electrical, steam, natural gas or other